Request a callback
Outdoor heat pump cabinet on a pad with white insulated lines and a power lead.
Old pipework stays only if it is the right size and still sound. Photo: Shixart1985, CC BY 2.0, via Wikimedia Commons

Heat Pump Replacement in Auckland

  • Free written quote, no obligation
  • Licensed electrician on the connection
  • Auckland-wide, all major brands

Get a free quote

Free written quote. No obligation. We reply by phone.

  • Free written quote
  • No obligation
  • Licensed electrician

Heat pump replacement in Auckland is an upgrade from an old heat pump that is failing, noisy or past its best to a new unit that heats better and runs more efficiently. We assess the room, remove the old units, fit the new ones and commission the system before we leave.

What you get

  • A unit sized to the room as it is now.
  • Better efficiency than an older model.
  • Removal of the old indoor and outdoor units, including refrigerant recovery.
  • The same careful install and licensed electrical connection as a new job.

Why choose us

We start with an assessment and ask whether replacement is the right call. If a repair will do, we tell you. If the unit is old, the fault is major or the room has never heated well, we explain why a new unit is the better move. We also check the room again, because the old unit's size may have been wrong from day one.

Signs it is time to replace

  • The unit is 10 to 15 years old or more and at the end of its life.
  • A major part has failed, such as the compressor.
  • The unit has become noisy.
  • Parts for your model are hard to find.
  • The room never reaches the temperature you set.
  • Repairs keep coming back.
  • The unit runs on an older refrigerant. Most current small units use R32.

If you are not sure, heat pump repairs can diagnose the fault and give you an honest view first.

How replacement works

  1. Tell us about your current unit. Send the brand, model and photos if you can.
  2. Assessment and quote. We check the room, the existing position and whether the existing pipework and brackets can be reused.
  3. Removal. We take out the old indoor and outdoor units and recover the refrigerant.
  4. Installation. We fit the new indoor and outdoor units, reconnect or replace the pipes as needed and have a licensed electrician connect it.
  5. Commissioning and handover. We vacuum, leak test and run heating and cooling, then show you the remote and tidy up. Many single-room replacements are done in a day, and your quote gives the timeframe.

Choosing the new unit

A like-for-like swap is the simplest option, and you can also upgrade to a different type, for example from high wall to floor console. Match the new unit to the room, not to the old label, so it is correctly sized. A high wall unit suits most living areas. A floor console suits villas and rooms with little high wall space. If you have several old units, a multi-split may tidy up the outside. Our what size heat pump guide shows how sizing works, and our best heat pump guide explains what to look for. For installation detail, see heat pump installation.

Brands

We replace with Mitsubishi Electric, Daikin, Fujitsu or Panasonic. You can stay with your current brand or switch.

Help with the investment

The Warmer Kiwi Homes grant is for homes with no existing fixed heater, so it generally does not cover a replacement. Our grants and subsidies guide explains who qualifies.

Looking after the new unit

Wash the filters monthly and book a yearly service. It protects the manufacturer's warranty and keeps the new unit fresh and efficient.

Get a free quote

Send us the brand and model of your current heat pump and a photo of both units. Our team replies with a written quote.

Get a free quote

Talk to a person about this job.

Questions

How do I know it is time to replace my heat pump?

Replacement is worth considering when the unit is more than 10 to 15 years old, the fault is major, such as a failed compressor, or it struggles to warm the room. We give you an honest view on repair or replace.

Can you remove my old heat pump?

Yes. Replacement includes taking out the old indoor and outdoor units. We tell you in the quote exactly what is included.

Do I need to replace the whole system?

Usually both the indoor and outdoor units are replaced together. We check whether the existing pipework, brackets and wiring are suitable to reuse before we quote.

Will a new heat pump be more efficient than my old one?

Newer units generally use less power for the same heat, and most new heat pumps are inverter models. The gain depends on the age and size of your current unit.

Should I get the same size as my old heat pump?

Not necessarily. The old unit may have been the wrong size for the room from the start, or the room may have changed. We check the room and recommend the right capacity.

Can I get a grant to replace my heat pump?

The Warmer Kiwi Homes grant is for homes with no existing fixed heater, so it generally does not apply to a replacement. See our grants and subsidies guide for who can apply.

How do I get a replacement quote?

Send us the brand and model of your current unit, a photo of the indoor and outdoor units and the room it serves. We reply with a free written quote.

How long does a heat pump replacement take?

Many single-room replacements are done in about a day. Multi-room systems take longer, and your quote gives the timeframe.

What if my old unit is a different brand?

That is fine. You can stay with your current brand or switch, and we check whether the existing pipework and brackets suit the new unit.

Can I upgrade to a different type of heat pump?

Yes. For example, you can move from a high wall unit to a floor console. We check the room and recommend the type that suits it.

Get a free quote

Tell us the address and the job. We will call you back.

Request a callback

Free written quote. Licensed electrician. Auckland-wide.

Tell us about the job

Free written quote. No obligation. We reply by phone.

  • Free written quote
  • No obligation
  • Licensed electrician
Call us Request a callback